Falcon 1000 Deluxe User's Guide download pdf (Page 30)

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.

Reassembling to Liquid Propane Gas

Centre Burner

IMPORTANT: If you are converting to LP Gas the large ring

in the conversion kit MUST be tted to the centre burner.

Fit the large ring (if required). Screw in the hexagon headed

venturi but to make tting the outer burners easier do not

fully tighten yet (Fig.8-4).

Outer Burners

Screw in the hexagon headed venturis (Fig.8-5) but to make

tting the other burners easier do not fully tighten yet.

Reassemble all the burners with the venturi tubes and evenly

tighten.

Ret the burner heads, making sure they are reassembled in

the correct way on the burner bodies (Fig.8-6).

Ret the pan supports.

Reassemble in the reverse order.

Stick on Label

Stick the appropriate label on to the data badge to indicate

the gas the appliance is now set for.

Pressure Testing

Connect the appliance to the gas supply.

The gas pressure can be measured at the pressure test point

on the gas connection block.

Connect the pressure gauge. Turn on and light one of the

hotplate burners.

See the data badge for test pressures.

Turn o the burners and remove the pressure gauge.



Check the appliance is gas sound.



Check the operation of all the burners.

Fig.8-4

Fig.8-5

Base of cooktop burner Bottom of burner head

Fig.8-6

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Falcon 1000 Deluxe User's Guide Page 30